Micro Channel Aluminum Fin Condenser for Truck Air Conditioner

Micro Channel Aluminum Fin Condenser for Truck Air Conditioner

                      Micro channel parallel circulation radiator expert company

The condenser-a component of the air conditioning circuit-is built-in into the motor cooling module, where it is utilised to great down and condense the compressed, gaseous refrigerant from the compressor. We produce brazed, flat tube condensers that provide large efficiency in spite of their compact and lightweight design. They make sure speedy cooling of the passenger compartment many thanks to ideal matching of warmth transfer and stress fall on each the coolant and the air aspect.

The condenser is a warmth exchanger in a mobile A/C system. Today, condensers are usually manufactured of aluminum, but in the previous, some had been made of copper/brass. Condensers appear very a lot like radiators, just a tiny thinner, and because they also depend on air flowing by way of them, are usually positioned in front of the radiator.
Like radiators and evaporators, condensers are also built as a collection of tubes with fins around them. its  job is to release warmth. Much more exclusively, to release the heat the refrigerant absorbed even though it was flowing by way of the evaporator, very significantly the very same way the radiator releases the warmth from motor coolant that the coolant absorbed while it was flowing via the motor. The refrigerant enters the condenser as a substantial-strain vapor, but as it flows through the condenser and cools, it turns again into a cooler high-stress liquid.

Product functions
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance 
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory

Company Advantage
one. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
two. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
three. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
four. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
five.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
6. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
7.Only when we have an independent team with high efficiency can we satisfy CZPT demands.  

Long time period business is based mostly on our trustworthy providers, quickly respond and our skilled knowledge to Vehicle AC. We’ll turn out to be your associate, not just your provider.
one.CAD Drawing, and mould design and style foundation on your sample
two.Mould examination and sample verification just before mass creation.
three.CZPTers of different shipping traces.
4.aggressive freight provides and one particular-cease support on clearing, transport issues.

Q1. Are you a manufacturing facility or buying and selling firm? A: we’re a self -own factory, we give 1-stop provider for our customers, from spare components to condenser, from specialized product sales to delivery and to soon after-sales, so as to save the value for shopper, handle the quality and direct time, give the ideal companies
Q2: The place is your manufacturing unit situated? How can I pay a visit to there? A: Our manufacturing unit is found in  HangCZPT, Shan dong, China.
The nearest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
Q3. What’s the manufacturing time for new molds and mass creation? A: 7-ten days to construct the new moulds, mass manufacturing normally takes around twenty-25days for 1 20gp,twenty five-30days for one 40hq, can approach urgently if want.
Q4: What is the payment phrases? A: Telegraphic Transfer (T/T) and Letter of Credit (L/C).
Q5: Can you deliver me samples? A: Indeed, Samples are for free, and freight is on your side.


Micro Channel Aluminum Fin Condenser for Truck Air Conditioner